Vert. 5-Achs-CNC-Bearbeitungszentrum

Wenzler VKM 1-1

5-Axis Machining Center
This Machine was used as Showroom Machine from 2016 until 2022. From 2022 the Machine was used for Production at HAL Plauen for the processing of Axle Carriers. Before it was used for Production, the Machine was fully overhauled/retrofitted.

In December 2024 a new Milling Spindle was purchased (Spindle has approx. 500 Working Hours)

Machine Working Hours: 24.000

Fjdpfx Aozc Ekrohtsph
Working Area:
-> X-axis 1500 mm
-> Y-axis 1250 mm
-> Z-axis 880 mm

Feed / Rapid Traverse:
-> X-axis 100 m/min
-> Y-, Z-axis 100 m/min

Axis Acceleration:
-> X-, Y-axis 7 m/s²
-> Z-axis 10 m/s²
-> Jerk 150 m/s³

Table Load Capacity:
-> Max. weight 400 kg

Spindle:
-> Tool holder HSK 100
-> Speed range 10,000 rpm
-> Power (S6/40% duty) 40 kW
-> Max. torque 175 Nm

Tool Magazine:
-> Positions 36
-> Max. tool length 520 mm
-> Max. tool diameter (with free adjacent slot) 205 mm
-> Max. tool weight 20 kg
-> Total load 200 kg
-> Tool change time 3 s

with Chip Conveyor and Chiller / Cooling unit
• Manufacturer: Lahntechnik GmbH
• Model: KESY 280-01
• Serial number: 2017-05981
• Year of manufacture: 2017
• Power rating: 13.6 kW
• Nominal voltage: 400 V / 3~ / PE / 50 Hz
• Control voltage: 24 V DC
• Protection class: IP 54
• Refrigerant: R410A – 10.03 t CO₂ equivalent
• Max. operating pressure: 30 bar (HD) / 19 bar (ND)
• Empty weight: 400 kg
• Country of origin: Germany

Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)

The Machine was taken out of Production in October 2025 due to the Factory Closure. It is still under Power and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please check the Videos available and taken from the Machine in December 2025.

Transport Locks not required
For Loading Unloading it requires special Wenzler Lifting/Transport Equipment. This Equipment must be rented through the Buyer directly at Wenzler/Heller Group. After Lifting and Unloading, the Equipment must be sent back by the Buyer to Wenzler.